PVC interior wall panels, as a commonly used wall decoration material in modern households, have the advantages of light weight, rich color patterns, insulation, moisture-proof, and convenient construction. Therefore, they are favored by consumers. Before using this type of panel decoration, it is important to understand how to install PVC wall panels.

I, How to identify the quality of PVC wall panels

1. Determine the materials to be used

The quality of a product is closely related to its materials. The PVC wall panels produced with this new material have a clear texture, good toughness, and are not prone to aging. In order to save costs, some manufacturers have reduced the use of recycled materials. The products produced have some taste, and the products and colors are not as good as those produced with new materials.

2. Determine product density

The PVC wall panels produced with this new material have high density, good comprehensive strength, and are not easily deformed; PVC wall panels produced from inferior materials have low density, feel, strength, and appearance, without the need to produce new materials.

3. Check the film used on the surface

A good film has a thicker thickness, realistic bottom, three-dimensional feeling, and no odor; The relative thin film, recycled from waste plastic, is relatively thin and has a taste.

II,  The installation method of PVC wall panels

1. To keep the extension line horizontal, you can use a ruler to vertically vector to the ceiling design elevation based on the level of the floor elevation, play the keel position line on the top plate, and bounce back to the horizontal line. On the ceiling of the wall.

When installing the keel suspension arm, the top of the ceiling and the position line of the main keel should be leveled, and the height of the lower part of the suspension arm should be determined. According to the position of the main keel and the spacing of the suspension, the bolt free end of the boom is fixed under the floor with expansion bolts.

3. When installing the main keel, it is necessary to first prepare the boom nut, pre mark the main keel, assemble the main keel and hang the hanging parts. Install the hanging parts into the corresponding boom bolts according to the line position, and screw on the snail.

When installing PVC wall panels, please start from the top. When cutting paper, the material should be flat and free of burrs. The higher the cutting speed, the fewer burrs. The size must be between 2mm, otherwise the seams will be very neat.

The above is how to install PVC wall panels. Among various decorative panels today, PVC wall panels are favored by consumers, so they should also be included in the selection range.